Energy Efficiency Energy Management Systems Service
Case Studies Join Our Team Contact Us
Sign in

Utility incentives for building controls and energy management systems. We file for incentives,
you maximize your ROI.

Programs like Mass Save can pay part of the cost of a controls project. FMC handles the application for you, from the first walkthrough to the rebate check.

A map of New England. Massachusetts, where Mass Save runs, is filled in. A line runs from each of the six states to its efficiency program. 1 2 3 4 5 6
  1. Mass SaveMassachusetts
  2. NHSavesNew Hampshire
  3. Efficiency MaineMaine
  4. Energize ConnecticutConnecticut
  5. Efficiency VermontVermont
  6. Rhode Island EnergyRhode Island

Program names and marks belong to their sponsors and are shown to identify the programs. FMC Technologies is an independent contractor, not a program administrator.

Massachusetts

Mass Save® can cover a real share of your controls project.

Mass Save is the Massachusetts utilities' energy-efficiency program, and most commercial and institutional buildings served by a participating utility qualify for at least one of its paths, industrial ones included. Applications are open now; funding is set year by year.

Typical cost-share, by path

  1. New installs & full retrofitsCustom controls & EMS

    30–50%Typical cost-share

    The performance-based path, and the most common one for EMS work: controllers, sensors, programming and commissioning, with the incentive sized to measured energy savings. Includes retrofits replacing pneumatic or older digital (DDC) systems.

  2. Re-tuning an existing EMSRetro-commissioning

    50–75%Typical cost-share

    For sites with an EMS already in place. Covers re-tuning sequences and fixing drift, with the measured savings documented for the claim. No major capital work required, and some of the best cost-share ratios in the catalog.

  3. New constructionWhole building

    Up to 40%Typical cost-share

    A design-phase path for projects beyond code minimum, coordinated with your architect and engineers. The earlier it's filed during design, the more measures can qualify.

  4. Smaller commercial accountsUnder 300 kW peak demand

    Up to 70%Typical cost-share

    A prescriptive program with less paperwork and faster turnaround. Often used for individual stores and offices, and for simpler controls and scheduling upgrades.

Typical cost-share ranges, not a quote. Actual incentive amounts depend on your utility's pre-approval and on measured savings.

Mass Save is sponsored by Berkshire Gas, Cape Light Compact, Eversource, Liberty, National Grid and Unitil. We match the project to the right path and combine paths where program rules allow.

See how an EMS works

New England

Across the state line, the program changes. The work doesn't.

Every New England state funds efficiency work its own way. For a building in any of them, we check what your utility offers, apply on your behalf and document the project the way that program asks.

  • NHSaves

    New HampshireNHSaves

    A collaboration of New Hampshire's electric and natural gas utilities: Eversource, Liberty, New Hampshire Electric Cooperative and Unitil.

  • Efficiency Maine

    MaineEfficiency Maine

    Run by the Efficiency Maine Trust, the state's independent program administrator. Its custom program takes site-specific projects.

  • Energize Connecticut

    ConnecticutEnergize Connecticut

    Offered through Eversource and United Illuminating, with Connecticut Natural Gas and Southern Connecticut Gas for gas measures.

  • Efficiency Vermont

    VermontEfficiency Vermont

    Vermont's statewide efficiency program. Custom incentives cover the projects its standard rebates don't fit.

  • Rhode Island Energy

    Rhode IslandRhode Island Energy

    The utility runs Rhode Island's commercial and industrial efficiency programs, with custom incentives and a program for tuning building controls.

Actual incentive amounts depend on your utility's pre-approval and on measured savings. Program availability in your rate class matters too.

You don't need to learn the portal.

We've managed hundreds of these filings. Here's how one goes, from first visit to check in hand.

  1. 1

    Screen the fit

    A walkthrough and a review of your past utility bills. We survey the site and rough out the scope, and you get a read on eligibility before anything is signed.

    You get: a scoping memo with an incentive estimate

  2. 2

    Lock in the incentive

    We model expected kWh savings against your baseline and submit for pre-approval with your utility. The incentive tier is locked before you sign anything.

    You get: utility pre-approval before install starts

  3. 3

    Install & commission

    Standard energy management system (EMS) work: controllers, sensors, sequences and commissioning, plus the documentation the utility will need to see at the end.

    You get: a commissioned system, documented for the claim

  4. 4

    Claim & receive

    The final measurement-and-verification report goes in. Once the utility signs off, the rebate is issued. We prepare the package and follow up with the utility until the check arrives.

    You get: the rebate, paid to the customer of record

We scope it and file it, then chase the check. You approve it.

You countersign the application and the final claim; we handle everything in between. The rebate is paid to you, the customer of record. We never take a cut.

  • Full retrofits and additions
  • No up-front paperwork fee
  • An in-house Mass Save liaison

Find out what your building qualifies for.

Tell us about the building and what you're hoping to do. We'll walk it at no cost and with no obligation, and you'll get an eligibility estimate before anything is signed.